Filter
Top Products
EN 49
SELECT AUX INPUT SET MODE
6
a– FRONT S-VIDEO IN (HR-S4600U only) : Move the
highlight bar (arrow) to "FRONT AUX INPUT" by
pressing CH 5∞ or SHUTTLE PLUS %fi, then press
OK or SHUTTLE PLUS
#
to set to "S-VIDEO".
b– FRONT VIDEO IN (HR-S4600U only) : Move the
highlight bar (arrow) to "FRONT AUX INPUT" by
pressing CH 5∞ or SHUTTLE PLUS %fi, then press
OK or SHUTTLE PLUS
#
to set to "VIDEO".
c– REAR S-VIDEO IN: Move the highlight bar (arrow) to
"REAR AUX INPUT" by pressing CH 5∞ or
SHUTTLE PLUS %fi, then press OK or SHUTTLE
PLUS
#
to set to "S-VIDEO".
d– REAR VIDEO IN: Move
the highlight bar
(arrow) to "REAR AUX
INPUT" by pressing CH
5∞ or SHUTTLE PLUS
%fi, then press OK or
SHUTTLE PLUS
#
to set
to "VIDEO".
● "FRONT AUX INPUT" appears only with HR-S4600U.
SELECT “EDIT” FOR PICTURE
CONTROL SET MODE
7
Follow the “Picture Control” section on page 26, then
select “EDIT.”
If you are using a JVC Master Edit Control-equipped
camcorder — go to step 8.
If you are not using a JVC Master Edit Control-
equipped camcorder — go to step 9.
NOTE:
When you select “EDIT” to dub tapes, be sure to select
“AUTO” or (“NORM” when “VIDEO CALIBRATION” is
set to “OFF”) after you finish dubbing the tapes.
ENABLE REMOTE PAUSE
FUNCTION
8
Press CH
5
∞ or SHUTTLE
PLUS
%
fi to move the
highlight bar (arrow) to
"AV COMPU-LINK", then
press OK or SHUTTLE
PLUS
#
to set to "OFF".
● The REMOTE PAUSE/AV
COMPU-LINK connector
works as the AV
Compulink Playback
connector when "AV
COMPU-LINK" is set to
"ON" (੬ pg. 31), and
works as the Remote
Pause connector when
"AV COMPU-LINK" is set
to "OFF".
● "FRONT AUX INPUT"
appears only with
HR-S4600U.
RETURN TO NORMAL SCREEN
9
Press MENU.
START PLAYER
10
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
11
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
NOTES:
●
If you use an auxiliary input to connect a cable box or DBS
receiver, make sure that the correct AUX INPUT mode
("VIDEO" or "S-VIDEO") is selected after you have finished
editing (
੬
steps 4 – 6 on pg. 48 and 49).
PREVIOUS PAGE
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
S-VHS MODE ON
=
AV COMPU-LINK OFF
FRONT AUX INPUT VIDEO
REAR AUX INPUT VIDEO
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
FUNCTION
=
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
VIDEO STABILIZER OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
S-VHS MODE ON
AV COMPU-LINK ON
FRONT AUX INPUT VIDEO
=
REAR AUX INPUT S-VIDEO
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
FUNCTION
=
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
VIDEO STABILIZER OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
S-VHS MODE ON
AV COMPU-LINK ON
=
FRONT AUX INPUT S-VIDEO
REAR AUX INPUT VIDEO
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END