JVC HR-S7600U VCR User Manual


 
EN 7
(MONO)
IN OUT
AUDIO
VIDEO
CH3
CH4
ANTENNA IN
TV OUT
IN OUT
S VIDEO
L
R
AV
COMPULINK
REMOTE
PAUSE
VHF/UHF
CABLE
BOX
TV OUT
RF Cable (supplied)
Matching Transformer
(not supplied)
AC Power
Cord
Audio/Video
Cable (supplied)
TV
ANTENNA IN
(Antenna or Cable input)
Back of VCR
75 ohm terminal
AC Outlet
Antenna or Cable
Flat Feeder
Coaxial Cable
NOTES:
To make the most of the Super VHS picture performance we
recommend that you use the supplied S-VIDEO cable to
connect your VCR to a TV with an S-VIDEO input connector.
To operate the VCR with your TV using the S-VIDEO connec-
tion, set your TV to the AV mode using the TV's remote
control.
You can also use the TV/VCR button on the VCR's remote
control to set your TV to the AV mode. (
pg. 61)
S-VIDEO Connection
CONNECT VCR TO TV
a– Connect both the RF cable and the AV cables to the TV as
explained in step 3 of "Basic Connections" ( pg. 6).
b– Connect the S-Video cable between the S-VIDEO OUT
jack on the rear of the VCR and the S-VIDEO IN jack on
the TV.
S-Video Cable
(supplied)
S VIDEO IN
S VIDEO OUT
AUDIO OUT
VIDEO OUT
HR-S7600U-EN01-23 99.4.28, 2:01 PM7