Filter
Top Products
EN 29
Repeat Playback
123
456
7
89
0
2
4
1
3
C.RESET
POWER
DISPLAY
TIMER
FF
PAUSE
REW
PLAY
STOP
START REPEAT
1
Press and hold PLAY (until " " blinks on the front
display panel) during playback, then release.
● The entire tape is played back 50 times.
STOP REPEAT
2
To stop, press STOP at any time.
NOTE:
Pressing PLAY, REW, FF, PAUSE or SHUTTLE PLUS
™
or
£
also stops Repeat Playback.
SHUTTLE PLUS
Tape Position Indicator
The Tape position indicator
appears on screen when, from the
stop mode, you press FF or REW,
or perform an Index Search or
Instant ReView. The position of
" " in relation to "B" (Beginning)
or "E" (End) shows you where you
are on the tape.
NOTES:
●
"SUPERIMPOSE" must be set to "ON", or the indicator will not
appear (
੬
pg. 30).
●
It may take a few seconds for the Tape Position Indicator to be
displayed.
BE
+++
Next-Function Memory
The Next Function Memory “tells” the VCR what to do after
rewinding. Before continuing, ensure that the VCR is in stop
mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer functions if the
cassette's record safety tab is removed.
SP
VCR
RESET COUNTER TO ZERO
1
Press C.RESET.
NOTE:
By pressing the DISPLAY button, you can change the
display to show the counter reading, channel number
or clock time. (Channel number is not displayed during
playback.)
Counter Reset
STOP
PAUSE
PLAY
POWER