Filter
Top Products
46 EN
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your VCR’s
VIDEO IN and AUDIO IN connectors.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
● If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SELECT “EDIT” FOR PIC-
TURE CONTROL SET MODE
3
Follow the “Picture Control” section on page 27, then
select “EDIT.”
NOTE:
When you select “EDIT” to dub tapes, be sure to select
AUTO or (NORM when AUTO PICTURE is set to OFF)
after you finish dubbing the tapes.
SET RECORDER’S INPUT
MODE
4
Set to "AUX". Press the NUMBER key “0” and/or CH to
select depending on the connector being used – "L-1"
for the rear AUDIO/VIDEO IN connector, or "F-1" for
the front AUDIO/VIDEO IN connector.
If you’re using a JVC Master Edit Control-equipped
camcorder — step 5
If not — step 8
ACCESS MAIN MENU
SCREEN
5
Press MENU.
ACCESS FUNCTION SET
SCREEN
6
Press CH
5
∞
or SHUTTLE PLUS
%
fi
to move the
highlight bar (arrow) to “FUNCTION SET”, then press OK
or SHUTTLE PLUS .
CH
Recorder
Your VCR
To rear panel PAUSE/AV
COMPULINK connector
Mini-plug cable (not supplied)
(JVC camcorder only)
Camcorder
Player
VIDEO OUT
AUDIO OUT
EDIT
VIDEO IN
AUDIO
IN
Audio/Video cable
(not supplied)
0
4
1
3
NUMBER "0"
SHUTTLE PLUS
MENU
OK
OK
MENU
EDITING (cont.)
%