Filter
Top Products
11
Remote control buttons and function
Adjust the volume
Press the VOLUME
bu
ttons to adjust the volume.
The volume indicator appears and the volume changes as
you press the VOLUME buttons.
Muting the sound
Press the muting button to turn off the
sound.
Pressing the muting button again restores the previous
volume level.
Watch images from external equipment
Use the INPUT button:
Press the INPUT b
utton to choose an VIDEO
terminal.
Displaying the source information
You can display the source information on the screen.
Press the DISPLAY button to display the
source information.
changes the display as
follows:
• The source information switched by DISPLAY button.
• The source type :
TV/VIDEO-1/VIDEO-2/PC
Pressing the DISPLAY button
In the PC mode:
If following message appears, the power lamp blinks in
amber and the TV goes in to reduced power mode.
- "NO SIGNAL"
- "CABLE NO INSERT"
- "OUT OF RANGE"
See "Troubleshooting" on page 25 for detials of this messages.
or
Signal source
01
STEREO
VIDEO-1
TV
EXT
No Display
or
Signal source
TV
EXT
No Display
PC
PC
TV mod
e EXT modes
Last
Programme
number
VIDEO-2
VIDEO-1
ENGLISH
MTS (Muti-Channel Television Sound)
MTS technology allows severial audio signals to be broadcast
at once, giving you a choice in what you wish to hear with a TV
program. In addition to mono or stereo sound, an MTS broadcast
may also include a second audio program(SAP).
• Keep the TV in stereo mode to get the best sound quality. The
Press MTS button to switch STEREO/SAP/MONO.
sound will work in stereo mode even if a certain broadcast is in
mono sound only.
• Choose the mono setting to reduce excessive noise on a certain
channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack,
if one is available.
• MTS unavailable if your television's input source is in VIDEO-1,
VIDEO-2.