JVC PD-50X795 Flat Panel Television User Manual


 
76
Aspect Ratio
You can select the aspect mode for ATSC from 4:3 or 16:9.
Press the MENU button
π
To DIGITAL SETUP
®
To enter
π
To Aspect Ratio
®
To select 4:3 or 16:9
Press the M
ENU button when finished
Notes:
• Set the mode to 4:3 or 16:9 before you record a program using the ATSC MONITOR OUT.
• Make sure the mode you choose is the same as the TV’s aspect ratio when the recorded
program is played back, so that you can obtain a good picture quality, free from any unatural
distortions.
Digital Setup
Digital Sound
Manufactured under license from Dolby Laboratories. "Dolby", and the
double-D symbol are trademarks of Dolby Laboratories.
You can select the optical digital sound output, either PCM or Dolby Digital when your TV is
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can
enjoy listening in 5.1ch sound when watching digital broadcasts.
Press the M
ENU button
π
To DIGITAL SETUP
®
To enter
π
To Digital Sound
®
To select PCM or DOLBY DIGITAL
Press the M
ENU button when finished
Notes:
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it
cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 23.
PD-42\50X795 (B) English 76 12/20/04, 9:26:43 AM