JVC TV 13142 TV VCR Combo User Manual


 
50
NOTE:
DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE REAR
COVER.
Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
VIDEO HEAD CLEANING
VIDEO HEAD CLOGGING
The video heads are the means by which the TV/VCR reads the picture from the tape during playback. In the unlikely
event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be deter-
mined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If
this is the case, have the TV/VCR checked by qualified service personnel.
Good Picture Snowy Picture
VIDEO HEAD CLEANING
AUTO HEAD CLEANING system cleans the video heads automatically when a cassette is inserted or ejected to
prevent dirt from accumulating on the heads. However, manual head cleaning is needed if the picture on playback is
still unclear although the picture on program is normal. This failure signifies that the head is getting dirty and occurs
when playing poor quality or damaged tapes. If the heads require cleaning, use a high quality head cleaning system
or have them cleaned professionally.
Auto Clock Setting
Notes for Canadian customers regarding the clock feature of the TV-13142 and TV-13142W:
The XDS signals are carried only by certain broadcast television stations (for example, the signal is carried by most
Public Broadcasting Service stations). You must be able to receive a station carrying the XDS signal to use the Auto
Clock Setting to set your TV/VCR’s internal clock. If you live in an area that does not broadcast XDS signals, you
must set the clock manually. Please see page 16 for instructions on how to manually set your TV/VCR’s clock.
Special note for residents of Newfoundland:
The Auto Clock Setting cannot be used to set the TV/VCR’s internal clock to Newfoundland time. The time zone
command does not include a setting for the Newfoundland time zone. Trying to use the Auto Clock Setting in the
Newfoundland time zone could result in an incorrect time setting or no setting at all. Please set your TV/VCR’s clock
using the Manual Clock Setting.
NOTES