Filter
Top Products
VCR MENU
The VCR Menu screen gives you a
number of options for operating your
VCR. For an explanation of how to
use on screen menus, see page 11.
*Press any of the M
ENU
buttons to
display the menu screen.
REGULAR VCR PROGRAMMING
This function lets you manually input
the time, date and channel informa-
tion for a program you wish to
record. (To program your VCR using
VCR Plus+ codes see page 22)
To REGULAR VCR
PROGRAMMING
To operate
The following menu will appear.
To select DATE
To START (hour AM/PM)
To set the time you wish the
VCR recording to begin.
• When you press the Right
or Left arrow button, the
current time is first displayed.
To STOP
To set the time you wish the
VCR recording to end
To CHANNEL
To select the channel of the
program you wish to record.
To RECORDING SPEED
To select the recording
speed.
• SP - select to record at standard
speed.
• EP - select to record at 1/3 normal
speed.
To move to FINISH
To exit programming and
save your settings. The
following message will
appear:
The T
IMER
button on the
remote control. The timer is
now in standby
The REC lamp will glow green on the
f ront panel of the unit, indicating the
timer has been programmed. When the
p r ogrammed start time arrives, the REC
lamp will glow red and re c o rding will
begin. When the programmed stop time
a r rives, the lamp will go out and the
re c o r ding will automatically stop.
N o t e : After re c o r ding if there are other
p re-set programs the lamp will turn gre e n .
Notes on overlapping programs:
If the timer is set to re c o r d two diff e re n t
p r ograms with overlapping times, the
second re c o rding will not start until the fir s t
is finished. For example if one timed
re c o rding is set to run from 5:00 to 6:00,
and a second is set from 5:30 to 7:00, the
second re c o r ding will not start until 6:00
when the first finishes. If one pro g r a m
e n t i rely overlaps another - program 1 is
f rom 5:00 to 6:00, program 2 is from 5:30
to 6:00 - the second program will not
re c o r d.
V C R M E N U I T E M S
2 0
YOUR PROGRAM IS CONFIRMED
PUSH THE TIMER BUTTON
NOTES:
R e c o rd i n g
s p e e d s
This VCR allows for
re c o rding and
playback at two
d i ff e r ent tape
s p e e d s .
SP - Standard Play.
This setting gives
the best re c o rd i n g
and playback
qualities. It is the
time length indicat-
ed on blank video
c a s s e t t e s .
EP - Extended Play
This setting re c o rd s
and plays back at
1/3 the SP s p e e d
(for example a 120
minute cassette can
re c o rd for six hours
at the EP s e t t i n g ) .
H o w e v e r, video and
audio quality at EP
speeds are not as
good as those
re c o rded at SP
s p e e d s .
Other VCR N o t e s :
To check your
p ro g r a m m e d
settings press the
PR O G . CH E C K b u t t o n
on the re m o t e
c o n t r ol. See page
28 for more details.
For tro u b l e s h o o t i n g
on Timer Record i n g
see page 23.