JVC TV 20240 TV VCR Combo User Manual


 
2 1 V C R M E N U I T E M S
RECORDING SPEED
Select the speed at which you
would like to record SP (standard
play) or EP (extended play)
Press any M
ENU
button to
display the VCR menu
screen.
To RECORDING SPEED
To set to SP or EP
Press E
XIT
to finish
AUTO SP EP
This function is used with timer-
recording (pg 20 or pg 22) while in
the SP tape speed mode. The unit
automatically calculates the amount
of time left in the recording and the
amount of tape left on the cassette.
If there is not enough tape to finish
the recording, the unit automatically
switches to the EP mode to finish
the recording.
Press any M
ENU
button to
display the VCR menu
screen.
To AUTO SPEP
To set to ON or OFF
ON: The unit will automatically
switch from SP to EP speed if
there is not enough tape left
on the cassette to finish the
recording.
OFF:The tape speed will not
change. The tape may run out
before recording is finished.
* Press E
XIT
to finish
REPEAT PLAY
Once playback of a cassette has
nished, this function automatically
rewinds the tape and begins
playback again. Playback may be
repeated up to 50 times.
Press any M
ENU
button to
display VCR Menu screen
To REPEAT PLAY
To turn Repeat play ON or
OFF
ON: Once a tape has finished it
will automatically rewind
and replay
OFF: Tape will stop when
playback is completed.
Press E
XIT
to finish.
Note: If a non-recorded period of
three seconds or more is encoun-
tered on a tape, playback will stop
and the tape will automatically
rewind. If you timer-record two
programs back-to-back, a non-
recorded period will automatically
be inserted between programs.
V. STABILIZER
This function eliminates any vertical
shaking of the video image during
playback in EP mode.
Press any MENU button to
display the VCR menu
screen.
To V. STABILIZER
To turn ON or OFF
Press E
XIT
to finish
Notes: Closed Captioning may not
display properly when V. Stabilizer
is set to "ON".
After a power interruption or once a
tape is ejected, V. Stabilizer will
return to "OFF".