JVC XV-523GD DVD Player User Manual


 
Getting started
14
Getting
started
XV-521BK [J] EN
LVT0435-001A
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting the unit’s DIGITAL OUT to the digital input of an amplifier, DAT or
MD by using an optional digital cable (the XV-521BK/523GD/525BK provides both the optical and coaxial jacks while
the XV-421BK only provides the coaxial jack). The digital audio signal from a disc is directly transferred. If you
connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital
cable, you can enjoy high-quality surround sound.
When you make the digital connection, also make the analog connection, because, depending on the disc type, no
audio may be reproduced from the DIGITAL OUT.
When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT”
setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL
AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See
“DIGITAL AUDIO OUTPUT” on page 36.
With the digital connection, the unit’s settings for COMPRESSION and DOWN MIX in the AUDIO page of the preference display
are invalid. Settings for these items must be made from the decoder.
To connect the power cord
When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the
unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The
STANDBY indicator lights and setup is completed.
Warning
Disconnect the power cord if you are not going to use the unit for a long time.
Disconnect the power cord before cleaning the unit.
Disconnect the power cord before moving the unit.
Do not connect or disconnect the power cord with wet hands.
Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or
other accidents.
Caution
Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.
To prevent any accidents or damages caused by an unsuitable AC power cord, only use the supplied power cord. If
the cord is damaged, contact a dealer and get the new power cord.
Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.
NOTES
OPTICAL
COAXIAL
DIGITAL
IN
AV COMPU LINK
DIGITAL OUT
PCM/STREAM
COAXIAL
S-VIDEO VIDEO
OPTICAL
VIDEO OUT
AUDIO OUT
RL
P
RPBY
COMPONENT
AUDIO
RIGHT
LEFT
IN
Audio cable
(not supplied)
The unit
Optical digital cable
(not supplied)
WhiteRed
White
Red
Digital equipment
When using the DIGITAL OUT (OPTICAL) jack, remove
the protection cap. Do not lose the removed cap.
When the DIGITAL OUT (OPTICAL) jack is not used, fix
the protection cap into the jack.
Coaxial digital cable
(not supplied)
For XV-521BK/523GD/525BK
: except XV-421BK