Filter
Top Products
Advanced operations
Advanced
operations
38
XV-N5SL/LET0204-010A/English
Selected Icon Operation Note
7
Angle selection
(during playback only)
Selects a desired scene angle in a
multi-angle part.
1 Press ENTER to open the pull-down window.
2 Use 5/∞ to select a scene angle.
Example:
1/3 j 2/3 j 3/3
3 Press ENTER to begin playback with the
selected scene angle.
(See page 32 for details about angle selection.)
Menu bar functions for Audio CD/Video CD/SVCD
Selected Icon Operation Note
1
Time mode selection
Selects the time mode shown in
the display window on the front
panel and in the status bar.
Press ENTER to select the time mode among the
followings.
TIME REM TOTAL T.REM Return to
initial
• TIME: Current track elapsed time
• REM: Current track remaining time
• TOTAL: Disc elapsed time
• T.REM: Disc remaining time
• When you have selected "REM" and
the disc is stopped, you can change
the track by pressing
4 or ¢.
• While the disc is stopped, "REM"
shows the total time of the current
track, and "T.REM" shows the total
time of the disc.
2
Repeat mode
Selects the repeat mode.
1 Press ENTER to open the pull-down window.
2Use 5/∞ to select the repeat mode from the
following.
OFF j TRACK j ALL j A-B j OFF
• TRACK: Current track repeat
• ALL: All track repeat
• A-B: Repeats a desired part (A-B repeat)
3 Press ENTER to make the selected repeat
function active.
(See pages 28 and 29 for details about repeat
function.)
• If you select "OFF" during repeat
playback, the unit continues
playback without repeating.
• For information on subsequent
operations for A-B repeat, see page
29.
3
Time search
(Except during Video CD/SVCD
playback with PBC)
Specifies a time from the
beginning of the current title as
the point from which to begin
playback.
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired time.
3 Press ENTER to begin playback from the
specified time.
(See page 24 for details about the time search.)
• This function cannot be used
during program playback.
4
Program
(While stopped only)
Specifies the playback order of
tracks.
1 Press ENTER to bring up the program table.
2 Specify tracks in the desired order using the
numeric buttons.
3 Press 3 to start program playback.
(See page 26 for details about the program.)
OFF PROG. RND.
TIME 25:58TRACK 33
2
1
3
4
5
Menu icons
The following table shows the menu bar
functions available for Audio CD/Video CD/
SVCD.
Note that, in the description of the
operation column, we assume the
associated icon is selected.
OFF
STPROG. RND.
TIME 25:58TRACK 33
2
1
3
4
5
6
Menu icons
OFF
ST1
PROG. RND.
TIME 25:58TRACK 33
-/4
2
1
3
4
5
6
7
Menu icons
PROG.
XV-N5SL(A).book Page 38 Wednesday, June 19, 2002 12:40 PM