Filter
Top Products
Audio/Video files playback
25
XV-NP10S/LET0246-001B/English
Audio/Video files playback
2 Press 5/∞ to move the bar to a desired
group, then press ENTER or 3/SELECT.
• In the right column, files in the selected group are shown.
3 Press 5/∞ to select the desired file, then
press ENTER.
The selected file is played back.
• When you press 3/SELECT, the continuous playback starts
from the selected file. The playback stops after playing back
of all files in the same group.
• You can also change the files on the list by pressing 4/
¢ or the numeric buttons.
To pause playback
Press 8.
Pressing 3/SELECT resumes normal playback.
To reverse or advance playback rapidly
Press 1/¡ during playback of MP3/WMA/DivX.
• Each time you press 1 or (¡), the player reverses (or
advances) playback, rapidly changing the playback speed as
follows:
- For MP3/WMA files
x2, x4, x6, and x8
- For DivX files
During rapid forward or reverse playback using 1/¡,
[11]/[¡1], [12]/[¡2], [13]/[¡3], or [14]/[¡4]
appears on the TV screen. The higher the value is, the faster
the playback speed is.
To zoom in a picture
Press ZOOM.
• Each time you press ZOOM, the magnification is changed—
- 1.5, 2 times, and 4 times for JPEG files
- 2 times, and 4 times for MPEG-4 files
- 2 times for DivX files
• The four-time magnification may not work for some JPEG/
MPEG-4 files according to their resolutions.
• Pressing 5/∞/2/3 moves the zoomed position during playback
of JPEG file.
To cancel the zoom function, select the normal size by pressing
ZOOM repeatedly.
To rotate/reflect a still picture
While the still picture is played back:
• Pressing 3 rotates the picture by 90° clockwise.
• Pressing 2 rotates the picture by 90° counterclockwise.
• Pressing ∞ reflects the picture vertically.
• Pressing 5 reflects the picture horizontally.
To stop playback
Press 7.
The Control display appears on the TV.
NOTES
• Opening the card door or the disc tray stops playback.
• During slide show playback, you cannot rotate/reflect a picture.
• It may take time to show the Control display due to the layer
configuration of the files and groups.
• The elapsed time may be incorrectly indicated on the display
window due to the recording condition of the file.
• The display window cannot show the file number more than
100. When the files numbered over 100th are played back, the
player re-counts file number again from 0.
• When the screen saver starts, the Control display disappears.
• The playback information appears on the TV as follows:
- [READING INDEX] means that the player is reading the
information of the selected MPEG-4/DivX file.
- [CODEC. NOT SUPPORTED ] means that the player cannot
play back the selected MPEG-4/DivX file.
- [JPEG DATA ERROR] means that this player cannot play back
the file.
- [JPEG DATA CORRUPTED] means that the file has error but
the player can play back it.
- [OUT OF MEMORY] means that the pixel resolution of the
JPEG file is too high. (See “Notes for making files/groups” on
page 23.)
- [NEXT] means the player skips to the next file.
- [PREVIOUS] means the player skips to the previous file.
- [SELECT] means the file is selected on the thumbnail screen.
Direct selection for JPEG files
You can select a particular JPEG file from the thumbnail screen.
1 Press THUMBNAIL/LIST while a JPEG file is
selected on the Control display.
The thumbnail screen appears on the TV. Up to nine
thumbnails from the selected file at a time can be displayed
on the screen.
• When selecting a group on the Control display, the
thumbnail screen does not appear.
2 Press 5/∞/2/3 to select the desired picture
on the thumbnail screen, then press ENTER.
The desired picture is played back.
• You can change the thumbnails by pressing 4/¢. All
the JPEG files in the single group are displayed every nine
thumbnails.
Repeat playback
During playback or while stopped, press
REPEAT.
• Each time you press REPEAT while a file is selected, the
repeat mode changes as follows:
If you press REPEAT while stopped, you need to press
ENTER or 3/SELECT to start playback.
To stop repeat playback
Press 7 .
Note that the repeat mode remains active.
To quit repeat playback
During playback, press REPEAT until no repeat icon is shown on
the display window.
• While stopped, press REPEAT until the repeat mode indication
on the Control display goes off.
Control display
Display
window
Function
REPEAT 1
1
Repeats the current
file.
REPEAT GROUP
Repeats all files in the
current group.
REPEAT ALL
Repeats all files on
the media.
No indication The repeat mode is off.
AVfiles_playback.fm Page 25 Friday, May 7, 2004 10:36 AM