Filter
Top Products
Additional information
43
Additional
information
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound
such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to
perform power switching.
1
Turn on the main power of the television.
2
Insert a disc into the source component.
3
Press 3 of the source component.
The following actions are performed automatically:
• Turning on the power for the television.
• Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).
• Turning on the power for the receiver.
• Setting the source of the receiver to the component which has started playback.
IMPORTANT!
IMPORTANT!IMPORTANT!
IMPORTANT!
You connect the component video output to your TV:
You connect the component video output to your TV:You connect the component video output to your TV:
You connect the component video output to your TV:
•
••
• Set the DVD player’s AV COMPULINK setting to DVD1.
Set the DVD player’s AV COMPULINK setting to DVD1.Set the DVD player’s AV COMPULINK setting to DVD1.
Set the DVD player’s AV COMPULINK setting to DVD1.
•
••
• Make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable, and do
Make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable, and do Make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable, and do
Make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable, and do
not make the S-VIDEO connection.
not make the S-VIDEO connection.not make the S-VIDEO connection.
not make the S-VIDEO connection.
Notes for connection
• If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions
may not be performed automatically.
• The AV COMPU LINK terminal on some televisions indicates “II.” Do not connect the terminal indicating “II” with the AV
COMPU LINK terminal on a receiver. If connected, the system will not work correctly.
• Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating “DVD.” Otherwise, the
system will not work correctly.
• There may be no description about connections to a DVD player in the instruction manual of a television or VCR. However a
television or VCR with AV COMPU LINK terminals indicating “II” or “EX” can be connected to a DVD player.
Operation
3HQJIP3DJH0RQGD\0 DUFK30