Filter
Top Products
ENGLISH
57
Symptoms Remedies/Causes
CD changer
• “Reset 01” – “Reset 07” appears on the
monitor.
Press the reset button of the CD changer.
• The CD changer does not work at all.
Reset the unit (☞ page 2).
TV tuner
• TV tuner unit does not work at all. Press the reset button of the TV tuner unit.
• “Reset 08” appears on the monitor. This unit is not connected to the TV tuner unit correctly.
Connect it correctly then press the reset button of the TV
tuner unit.
DAB tuner
• “No DAB Signal” appears on the monitor. Move to an area with stronger signals.
• “Reset 08” appears on the monitor. Connect this unit and the DAB tuner correctly, then reset the
unit (☞ page 2).
• The DAB tuner does not work at all. Reconnect this unit and the DAB tuner correctly. Then, reset
the unit (☞ page 2).
• “Antenna Power NG” appears on the monitor. Check the cords and connections.
iPod/D. player playback
• The iPod or D. player does not turn on or does
not work.
• Check the connecting cable and its connection.
•
Charge the battery.
• For D. player: Update the firmware version.
• The sound is distorted. Deactivate the equalizer either on this unit or the iPod/
D. player.
• “Disconnect” appears on the monitor.
Check the connecting cable and its connection.
• For iPod: Playback stops. The headphones are disconnected during playback. Restart
playback.
• No sound can be heard when connecting an
iPod nano.
Disconnect the headphones from the iPod nano.
• No sound can be heard.
• “ERROR 01” appears on the monitor when
connecting a D. player.
Disconnect the adapter from the D. player. Then, connect it
again.
• “NO FILES” or “NO TRACK” appears on the
monitor.
No tracks are stored. Import tracks to the iPod or D. player.
• “RESET 01” – “RESET 07” appears on the
monitor.
Disconnect the adapter from both this unit and iPod/D.
player. Then, connect it again.
• “RESET 08” appears on the monitor. Check the connection between the adapter and this unit.
• The iPod’s or D. player’s controls do not work
after disconnecting from this unit.
Reset the iPod or D. player.
AV-IN
• “No Signal” appears on the monitor. • Turn on the video component if it is not on.
• This unit is not connected to the video component
correctly. Connect it correctly.
EN55-59_KW-AVX706EE_f.indd 57EN55-59_KW-AVX706EE_f.indd 57 06.2.17 5:09:45 PM06.2.17 5:09:45 PM