JVC KV-AVX706 TV DVD Combo User Manual


 
8
ENGLISH
MONITOR CONTROL
1 Monitor control buttons
Used for a JVC monitor—KV-MR9010,
or KV-MH6510.
DVD/RECEIVER CONTROL
2 • Turns on the power.
Attenuates the sound if the power is on.
Turns off the power if pressed and held
(while the power is on).
3 Selects the source.
4 Selects the FM/AM/DAB bands.
5 Changes the aspect ratio of the playback
pictures.
6 Activates or deactivates Dual Zone.
7 Adjusts the volume level.
Also functions as 2nd VOL when
pressed with SHIFT button ( page 26)
.
8*
1
• DVD/DivX 6: Shows the disc menu.
VCD: Resumes PBC playback
( page 21).
9*
1
Not used as SETUP button for this
receiver.
p SHIFT button
Basic operations — Remote controller (RM-RK240)
Installing the lithium coin battery (CR2025)
Before using the remote controller:
Aim the remote controller directly at the
remote sensor on the unit.
DO NOT expose the remote sensor to bright
light (direct sunlight or artificial lighting).
The receiver is equipped with the steering
wheel remote control function.
See the Installation/Connection Manual
(separate volume) for connection.
Warning:
To prevent accidents and damage
• Do not install any battery other than
CR2025 or its equivalent.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
• Do not leave the battery with other
metallic materials.
• Do not poke the battery with tweezers or
similar tools.
• Wrap the battery with tape and insulate
when throwing away or saving it.
IMPORTANT:
If Dual Zone is activated ( page 26),
the remote controller functions only for
operating the DVD/CD player.
Main elements and features
MODE MENU
ASPECT
ZOOM
ATT
SOURCE
DISC
+
DISC
DVD / RECEIVER CONTROL
EXTRA MONITOR CONTROL
+10
–10
123
456
78
0
9
–100
BAND
OSD
MENUTOP M
SETUP
RETURN
ENTER
DUAL
SHIFT
VOL
2nd VOL
+100
DIRECT
ASPECT
SURROUND
EN07-14_KW-AVX706EE_f.indd 8EN07-14_KW-AVX706EE_f.indd 8 06.2.17 4:45:22 PM06.2.17 4:45:22 PM