Filter
Top Products
22 EN
PAL B/G, D/K, I
SECAM B/G,
D/K (OIRT)
PAL
MESECAM
PAL
MESECAM
INFORMATION ON MULTI-SYSTEM COMPATIBILITY
Setting Of The Colour System Select Buttons
Use the COLOUR SYSTEM button on the recorder's front panel
to select the colour system. Pressing this button changes the
mode as illustrated on the left. The On-Screen display will show
which mode is selected.
Mode Display Description
AUTO Usually set to this mode. This mode
(Colour Signal) automatically detects PAL, NTSC*, SECAM
or MESECAM and adjusts to the colour
system being recorded or played back.
When it does not perform properly, set the
colour system manually.
* NTSC recording is not possible with this
recorder.
MANUAL For recording, there is a choice of 2
(Colour Signal) selectable modes; PAL/MESECAM. Select
the mode that matches the colour signal
being received. For playback, there is an
additional mode which allows NTSC tapes
to be played back and viewed on PAL TVs.
Off-Air Recording
The built-in multi-system tuner is capable of receiving PAL B/G, D/K and I and SECAM B/G and D/K broadcasts.
Recorded tapeHR-J347EM
Multi-system
tuner
(B/G, D/K, I)
Recording circuit
Mode
AUTO
NTSC
PAL*
PAL
MESECAM
SECAM*
COLOUR
SYSTEM
TV system
NOTE:
This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).
* "NTSC[PAL" and "SECAM" appears during playback only.
NOTES:
●
SECAM signals will always be recorded as MESECAM. Select
the AUTO or the MESECAM mode when recording SECAM
signals.
●
When playing back a SECAM tape, select the AUTO or the
SECAM mode. SECAM signals will always be played back as
SECAM.
●
For SECAM tapes, only SP recordings can be played back on
this recorder.