JVC LPT0328 VCR User Manual


 
Masterpage:Right-NoTitle0
EN
21
Filename [HRS9700EU1a.fm]
Page 21 July 3, 2000 2:20 pm
Playback Features
NOTES:
Refer to the
SHUTTLE
ring
illustration on the
right as you read
the following
procedures.
Reverse playback
is possible only
with a tape
recorded in SP
mode.
Variable Speed Search
During playback or still, turn the
SHUTTLE
ring to the
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the illustration
above).
NOTE:
Variable speed search with TimeScan (
pg. 24) can be used by
pressing the remote control’s
w or e button.
Still Picture/Frame-By-Frame
Playback
1
Pause during playback.
Press
9
.
If there is vertical jitter, use the
PR
buttons to correct the
picture.
During still picture, the sound from the previous 3 seconds
(approx.) will be played back repeatedly (provided there was
at least 6 seconds of normal playback prior to engaging the
pause mode).
“TIME SCAN AUDIO” must be set to “ON”, or you cannot
hear the sound during still picture. (
pg. 71)
2
Activate frame-by-frame playback.
Turn the
JOG
dial to the right for forward frame-by-frame
playback, or to the left for reverse frame-by-frame
playback.
OR
Press
9
.
OR
Press
w
or
e
.
Slow Motion
During playback or still, turn the
SHUTTLE
ring to the
right for forward slow motion, or to the left for reverse
slow motion (refer to the illustration on the left).
OR
During still picture, press and hold
9
for 2 seconds, then
release. Press
9
and release again to return to still
picture.
OR
During still picture, press and hold
w
or
e
. Release to
return to still picture.
NOTES:
For Time Jog, see page 25.
Manual tracking is possible during slow motion playback.
(
pg. 23)
High-Speed (Turbo) Search
During playback or still, turn the
SHUTTLE
ring all the
way to the right for forward high-speed search, or to the
left for reverse high-speed search. Releasing
SHUTTLE
ring resumes still picture playback.
OR
During playback or still, press
5
for forward
high-speed search, or
3
for reverse high-speed search.
NOTE:
For short searches, press and hold 5 or 3 for over 2
seconds during playback or still picture. When released, normal
playback resumes.
ATTENTION
The operations by
JOG
dial/
SHUTTLE
ring do not include
TimeScan. (
pg. 24)
Picture may not appear during high-speed search with an
LP/EP-recorded tape.
Noise may appear or the picture may appear distorted with
an EP-recorded tape during still, slow motion,
frame-by-frame playback or variable speed search.
In the high-speed search, still, slow motion or
frame-by-frame playback mode, the picture will be
distorted, and there will be a loss of colour.
When normal playback resumes from search (including
TimeScan), still, slow motion or frame-by-frame playback,
the picture may jitter vertically momentarily depending on
the type of TV being used.
To resume normal playback, press
4
.
HRS9700EU1a.fm Page 21 Monday, July 3, 2000 2:36 PM