Filter
Top Products
Filename [HRJ880EU3.fm]
Masterpage:Left
56
EN
Page 56 May 18, 2001 2:45 pm
EDITING (cont.)
Information On
J Terminal
J Terminal [JLIP (Joint Level Interface
Protocol) Connector]
The J terminal is used to connect the recorder to a personal
computer or similar device to allow computerized control of the
recorder during editing and certain other operations.
Examples:
With the optional JLIP VIDEO CAPTURE BOX GV-CB3E:
● Allows you to capture still images from the recorder into a
personal computer.
For further details consult your nearest JVC dealer.
JLIP ID Number
Your recorder has its own JLIP ID number. This ID number must
be unique when your recorder is connected to another device
via its J terminal. The ID number is preset to “1” at the factory.
You can change this number to any number between “1” and
“99”. If it is necessary to change the JLIP ID number, perform the
following steps.
A
Access the Main Menu screen.
Press
MENU
.
B
Access the Initial Set screen.
Press
rt
to move the highlight bar (pointer) to “INITIAL
SET”, then press
OK
or
e
.
C
Access the JLIP ID No. Set screen.
D
Set the JLIP ID number.
E
Return to the normal screen.
Press
MENU
.
J terminal
Press
rt
to move the
highlight bar (pointer) to
“JLIP ID NO. SET”, then press
OK
or
e
.
Press the
number keys
to
enter the desired ID number,
then press
OK
.
HRJ880EU3.fm Page 56 Friday, May 18, 2001 2:54 PM