JVC LT-20DA6SSP Flat Panel Television User Manual


 
- 24 -
If you have not changed the PIN code in the
CONFIGURATION menus Enter PIN
Code (see page 22), input the PIN code
you chose.
The lock icon appears next to the channel
name in the Edit PR List.
When a locked channel is chosen, the En-
ter PIN code input window will appear. If the
correct PIN code is input, the picture ap-
pears.
 When you forget the PIN code for the Lock,
you can unlock locked channels by perform-
ing Automatic Search (see INSTALLATION).
Setting the favourite channels
If only channels that you often watch are set
as favourite channels, you can choose from
just those channels by pressing / .
 After setting the favourite channels, check
the Favourite Mode in Configuration
(see page 21) is set to ON.
1. Press the 
 /   buttons and choose
Favourites on the bar at the bottom of the
screen.
2. Press the 
 /   buttons and choose
the channel to be registered as a favourite
channel, and then press the OK button.
The favourite icon (
) appears on the
right side of the chosen channel.
When you leave the Channel List screen, by
pressing MENU the channel showing on the
quarter screen is selected for normal viewing
on the whole screen.
Installation
Although your TV will not lose its settings or
stored channels when switched off, you may
wish to re-install the programs because you
have moved to a different area with different
broadcast frequencies, you wish to reinstate
a channel previously deleted from the chan-
nel list, or you want to watch new channels
which have started broadcasting.
Display the DTV Menu and using the 
 or
 buttons, highlight the Installation line and
press OK to display the Installation Menu.
The Installation menu appears.
You can either select Factory Settings, effec-
tively resetting the receiver to its factory setting
condition, or just search for channels.
Automatic Search:
The receiver can search for channels auto-
matically (searching all the broadcast frequen-
cies for free-to-air channels).
To perform Automatic search, Select Automatic
Search with the 
 or   buttons and press
OK. A warning message is displayed.
This starts the automatic tuning process and
searches through all the available broadcast
frequencies for free-to-air channels.
Previous channels will be replaced on auto-
matic search.
If no digital terrestrial television broadcasts
are found, the TV will display a message:
01-ENG-20710W-17MB16P-C1897S UK-(LT-20DA6SSP)-(TVAVOK)-IDTV-10042117-5008XXXX.p6515.06.2006, 17:3924