Filter
Top Products
ENGLISH - 27 -
TV and Video Recoder (VCR)
Connect the Video Recorder to the ANT (an-
tenna input) socket of the TV with the aerial
cable.
Connect the Video Recorder to the EXT-1 or
EXT-2 terminal with the SCART cable, or con-
nect it to the EXT-3 terminal with the audio
and video cables.
NTSC Playback
Connect a NTSC video recorder to a terminal.
Then press AV button to select the corre-
sponding AV mode.
NTSC 3.58/4.43 system is detected automati-
cally in AV mode.
Camera and Camcorder
To connect to the EXT-3 terminal
Connect your camera or camcorder at the back
side of your TV.
Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You should connect the jacks to the
input in the same colour.
Connect the decoder to the video
recorder
Some video recorders have a special euro-
connector for decoder.
Connect an eurocable to the euroconnector
of your decoder and to the special eurocon-
nector of your video recorder. See also the
handbook of your video recorder.
To connect your video recorder to the TV, see
TV and Video Recorder section.
If you want to connect more equipment to your
TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket on the right
side of your TV, to connect headphones.
Connecting the PC
Connect PC monitor with 15-pin PC cable to
the 15-pin connector on the rear of the com-
puter. For detailed installation procedure see
Installation in PC mode.
To connect to S-Video input
Connect your camera or camcorder at the back
side of your TV.
Connect your equipment to the TV via S-Video
input at the back side by using S-Video
cables.
01-ENG-2325W-17MB08P-1861UK-(LT-23B60SJ)_02062005.p65 02.06.2005, 10:5627