Filter
Top Products
Additional preparation
34
LT-26C31BUE/SUE/BJE/SJE / LCT1484-001A-U / English (EK)
Equipment which can output the S-VIDEO
signal (Y/C signal) such as an S-VHS VCR
Connect the equipment to an EXT terminal (but not the
EXT-1 terminal).
You can choose between an S-VIDEO signal (Y/C signal)
and a regular video signal (composite signal). For details of
how to operate the equipment, see “S-IN (S-VIDEO input)”
on page 23.
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible VCR to the
EXT-2 terminal. If not, the T-V LINK function will not
work properly.
• When connecting a T-V LINK compatible VCR to the
EXT-2 terminal, be sure to connect the decoder to the
VCR. If not, the T-V LINK function may not work
properly. After you have stored TV channels in the
programme numbers (PR) list, set the DECODER (EXT-
2) function for the programme number (PR) to ON to
unscramble a scrambled TV channel. For details, see
“Using the DECODER (EXT-2) function” on page 32.
Connecting headphones
Connect the headphones with a stereo mini-jack (3.5 mm
diameter) to the headphone socket at the TV.
• The headphone volume is adjusted with the
“HEADPHONE” menu (see page 22).
Video or sound signal output from the EXT-2
terminal
You can change over the output of the video/sound signal
from the EXT-2 terminal. This is useful when you want to
dub the video/sound from another device onto the VCR
connected to the EXT-2 terminal. For details on how to do
this, see “DUBBING” on page 23.
TV output from the EXT-1 terminal
The video/sound signal of a TV channel you are viewing is
always output from the EXT-1 terminal.
• Changing over a programme number (PR) also changes
over the TV output from the EXT-1 terminal.
• The video/sound signal from an EXT terminal cannot be
output.
• Teletext programmes cannot be output.
Connecting Speakers/Amplifier
See the Audio equipment connection diagram, then connect
the audio equipment you desire to the TV.
You can use external front speakers to listen to the TV
sound instead of the TV speakers.
Before connecting anything:
• Read the manuals provided with the amplifier and
speakers.
• Turn the TV and amplifier off.
• To prevent magnetism from the speakers adversely
affecting the TV screen, use magnetically-shielded
speakers for the front speakers.
• Note that connecting cables are not supplied.
• The output from the AUDIO OUT terminal is not
interrupted by headphone connection to the TV. You
cannot cut the sound from the front speaker even if you
connect a headphone to the TV.
• Adjust the volume of the external speakers with the
amplifier.
EXT-3
EXT-2
R
L
S
R
L
(S )
EXT-1
AUDIO
OUT
EXT-4
R
Y
Pb
Pr
L
L
R
without terminal covers
1 Amplifier
2 External speakers (Magnetic-shielded type)
Body_Eng.fm Page 34 Friday, August 29, 2003 1:57 PM