Filter
Top Products
13
Quick Setup Connections
Connections
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Remove the terminal cover
There are connection terminals behind the covers on the left and right
in the back of the TV. Remove these two covers before connecting an
antenna or other devices. The covers can be removed by removing the
hooks. When replacing the covers, place the side of the covers against
the TV and insert the hooks.
Note:
• Leave the terminal covers off if they do not fit properly. Do not force to
replace the covers. Doing so may damage the connection cables and
covers.
Step 3 - Connecting your devices
Diagram #2
Do you use a Cable TV Box?
Do you have a VCR? Do you have a VCR?
Diagram #1 Diagram #3 Diagram #1
Yes
No
Yes No Yes No
LT-26\32X575\585 English 13 6/25/04, 10:02:10 AM