Filter
Top Products
28
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ENGLISH
ENGLISH
z If the characters are unreadable.
g Select different teletext language group.
Refer to page 11 for sound system and page 20 for colour system.
Connect a DVI device to HDMI-1 using DVI-HDMI conversion cable. Connect
analogue sound output of the DVI device to L and R terminals in HDMI-1
(DVI ANALOG AUDIO).
z Set “HDMI-1 Audio Setting” to “Analogue” or “Auto” g (P. 24)
z HDMI-2 and HDMI-3 inputs do not support analogue sound (HDMI-1 (DVI
ANALOG AUDIO)).
When “Auto” is selected in Zoom, the aspect ratio will turn to the ratio
obtained from the information the TV received.
Language group for teletext
Group Languages
Group-1
English, French, Swedish, Finnish, Hungarian, Turkish, German,
Portuguese, Spanish, Italian, Greek
Group-2
Polish, French, Swedish, Finnish, Hungarian, Czech, Slovak, German,
Slovenian, Croatian, Italian, Rumanian
Group-3
English, Russian, Byelorussian, Estonian, Czech, Slovak, German,
Ukrainian, Lettish, Lithuanian
Group-4
English, French, Swedish, Finnish, Hungarian, Czech, Slovak, German,
Italian, Arabic, Hebrew
Group-5 English, French, Turkish, Farsi
Sound and colour system in your country or region
Area Country or Region
Sound
system
Colour
system
Asia,
Middle East
Bahrain, Kuwait, Oman, Qatar, United Arab
Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
B/G
PAL
China, Vietnam, etc. D/K
Hong Kong, etc. I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM
Europe
Russia, etc.
D/K
SECAM
Czech Republic, Poland, etc.
PALGermany, Holland, Belgium, etc. B/G
UK, etc. I
Africa
Republic of South Africa, etc. I
PAL
Nigeria, etc.
B/G
Egypt, Morocco, etc. SECAM
PC signals that can be displayed
z If the signal doesn’t
appear, check that the
vertical frequency on the
PC is set to “60Hz”.
Resolution
640 x 480
(VGA)
1024 x 768
(XGA)
Vertical frequency (Hz) 60.0 60.0
Connect DVI devices
Auto in “Zoom”
Technical information
LT-46SZ58_EN.book Page 28 Thursday, August 14, 2008 3:05 PM