Filter
Top Products
Additional menu operations
32
LT-26C31BUE/SUE/BJE/SJE / LCT1484-001A-U / English (EK)
Changing the COUNTRY setting
After the AUTO PROGRAM function is completed, you
can change the country you have already set by using the
AUTO PROGRAM function.
When registering the TV channels for French broadcast
stations (SECAM-L system), perform this operation to
change the country.
1 Display the INSTALL menu
When the EDIT menu is currently being
displayed:
Press the
h
(information) to return to the INSTALL
menu.
2 Press the 6
66
6 buttons to choose AUTO
PROGRAM. Then press the a
aa
a button
A COUNTRY menu appears as a sub-menu of the
AUTO PROGRAM function.
There are two COUNTRY menus. Pressing the yellow
button changes the COUNTRY as follows:
3 Press the 5
55
5 and the 6
66
6 buttons to choose a
country
4 Press the a
aa
a button to complete the setting
The menu disappears.
To return to the INSTALL menu from the
COUNTRY menu:
Press the
h
(information) button instead of the a button.
Using the DECODER (EXT-2) function
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT-2 terminal, use
the DECODER (EXT-2) function to unscramble the
scrambled TV channels.
1 Turn on the decoder power
2 Display the scrambled TV channel on the TV
Even if the decoder is working, a scrambled picture
appears.
3Press the a
aa
a button to display the MENU
The MENU (main menu) appears.
4Press the 6 buttons to choose FEATURES.
Then press the a
aa
a button
The FEATURES menu appears.
5Press the 6 buttons to choose DECODER
(EXT-2). Then press the 5 buttons to choose
ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2) function:
Press the 5 buttons to choose OFF.
6Press the a
aa
a button to complete the setting
The T-V LINK menu appears.
7 Follow “Downloading data to a VCR” on
page 31 to transmit the programme number
(PR) data to the VCR
8 If you have another TV channel you want to
unscramble using a decoder, repeat steps 2 to 7
If the DECODER (EXT-2) function has been set to
“ON” but the TV channel cannot be unscrambled, check
the following:
• Has the decoder been connected to the VCR properly
according to the VCR and decoder instruction
manuals?
• Has the decoder power been turned on?
• Can the TV channel be unscrambled with a decoder?
• Do you need to change the VCR settings in order to
connect the decoder? Confirm that the VCR is set
properly by rechecking the VCR Instruction manual.
BACK
MORE
START
TV OK
BACK
MORE
START
TV OK
D0003-EN
D0023-EN
SLEEP TIMER
BLUE BACK
CHILD LOCK
DECODER(EXT-2)
OFF
OFF
ON
ON
BACK
FEATURES
TV OK
D0005-EN
BACK
DOWNLOAD TV VCR
T-V LINK
TV OK
EXIT
LT-26C31BUE(EK)_Eng.book Page 32 Friday, August 22, 2003 2:47 PM