JVC MNV*SW*YP TV VCR Combo User Manual


 
16
Playback Control Function
Playing Video CDs with Playback
Control function
This Player provides a Playback Control function which uti-
lizes a procedure (menu selection) programmed in a video
CD. The playback operation procedure may differ depending
on the disc you use.
The Playback Control function is described below and in the
figure.
High-resolution still image display - Super-fine reproduction
of still images with more than 4 times the resolution of video
tape.
Menu-driven playback - interactive menus for easy selection
of tracks
Preparations
A video CD with the Playback Control function is required for
this operation.
Only the NORMAL mode can be used.
The buttons available for use are the number keys, VCD
NUMBER –/+ buttons, the 4/¢ PREV/NEXT buttons,
3 SELECT button, DISC (1 through 3) buttons, and
RETURN button.
Button functions
Player's VCD NUMBER –/+ buttons
remote control's Number keys
(Including +10 button) .............. Select a specific menu item
from the television screen or
monitor.
4/¢ PREV/NEXT buttons.. Move through menu.
3 SELECT button .................... Starts up a video CD with the
PBC function in DISC tray 1
to 3.
DISC (1 through 3) buttons ...... Start up a video CD with the
PBC function in the specified
DISC tray.
RETURN button................. Returns to the menu.
Operation
1. Verify that the Player is in NORMAL mode.
or
4. When the menu you want appears, select an item in the
menu by using the number keys. The numbers on the
number keys correspond to the menu item numbers.
5. To return to a menu and stop the track being played,
press the
RETURN button.
2. Press the DISC (1 through 3) or
33
33
3 SELECT button, and
then the Player starts up the PBC function. “Pb” is
shown in the Display window. The main menu, “PBC”,
and disc/track number are displayed on the television
screen.
Notes :
Page numbers in the menu show that preceding pages
exist. To move from the current menu, press the 4/¢
PREV/NEXT buttons.
If you have no desire to use the PBC function when playing
a disc with the PBC function, switch the MODE switch to
“PBC OFF” before playing.
When you change the mode switch except NORMAL mode
during play Playback Control disc, the play stops, so reset
again from the beginning.
If you press number keys directly to select the track, you
can’t enter the Player into PBC mode.
3. To move through the menus, press the
4 ¢4 ¢
4 ¢4 ¢
4 ¢ PREV/
NEXT buttons.
NEXTPREV
KARAOKE NORMALPBC OFFKARAOKENORMALPBC OFF
RETURN
(Television screen)
2-PBC PBC
1
2
3
4
1
2
3
SELECT