Filter
Top Products
19
Remote control buttons and functions
ENGLISH
PD-42/35DX(ASIA) / LCT1373-001A / English
Choose the ZOOM mode
1 Press the c
cc
c button to display the ZOOM
menu
• The c button does not work in the twin
pictures mode.
2 Press the 6
66
6 buttons to choose a ZOOM mode.
Then press the a
aa
a button
The picture expands and the chosen ZOOM mode is
displayed in about 5 seconds.
Adjusting the visible area of the picture
If subtitles or the top (or bottom) of the picture are cut off,
adjust the visible area of the picture manually.
1 Press the c
cc
c button
The ZOOM menu appears.
2 Press the a
aa
a button to display the ZOOM mode
indication
Indicator is displayed.
3 While it is displayed, press the 6
66
6 buttons to
adjust the visible area vertically
• You cannot adjust the visible area in REGULAR or
FULL mode.
CINEMA SURROUND function
You can enjoy sounds with a wider ambience.
Press the SURROUND button to turn the CINEMA
SURROUND function on or off
• The CINEMA SURROUND function does not work
properly with mono sound.
• The CINEMA SURROUND function can be also turned
on or off by using the SOUND SETTING menu. For
details, see “CINEMA SURROUND” on page 29.
Displaying the current time
You can display the Current Time on the screen.
Press the
h
hh
h
(Information) button to display the
current time
Pressing the
h
(Information) button changes the display as
follows:
• This TV uses teletext data to set the current time. If the
TV has not received a TV channel that has teletext
programmes since it was turned on, the time display is
blank. To view the current time, choose a TV channel
that has teletext programmes.
• When watching videos, an incorrect current time is
sometimes displayed.
Return to TV channel instantly
You can return to a TV channel instantly.
Press the b
bb
b button
The TV returns to the TV mode and a TV channel appears.
Using the FREEZE function
You can view the current programme as a still picture.
1Press the F
FF
F button
The still picture of the current picture will appear.
To cancel the FREEZE function:
Press the F button, the 6 buttons or the
number buttons.
• The FREEZE function does not work while a sub-
picture is displayed.
• The still picture cannot be output from the TV.
• The FREEZE function is cleared if no operation is
performed for approximately one minute.
No indication
D0056
current
programme
still picture
PD-42&35DX_Eng.book Page 19 Tuesday, January 28, 2003 5:39 PM