JVC TM-2000SU Home Theater Screen User Manual


 
6
VOLUME/SELECT
+
VOLUME/SELECT
+
PHASE CHROMA BRIGHT CONTRAST
INPUT SELECT
BA
Y/ C VIDEO VIDEO
Terminals on the rear panel
Video signal input Audio signal input
1 Input A
VIDEO A terminal AUDIO A terminal
(VIDEO)
2 Input B
VIDEO B terminal
AUDIO B terminal
(VIDEO)
3 Input B
VIDEO B (Y/C) terminal
(Y/C)
NTSC
VOLUME : 20
PHASE : 00
+
INPUT
SELECT
button
Items
VOLUME/SELECT button
–+
PHASE
reddish greenish
(Phase)
CHROMA
lighter deeper
(Chroma)
BRIGHT
darker brighter
(Brightness)
CONTRAST
lower higher
(Contrast)
Color system indication
(PAL or NTSC)
00 ~ 50
–20 ~ +20
HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION
PICTURE ADJUSTMENT
1. Press the POWER switch to turn on the power.
_ON : Power turns ON. (Power indicator: lit)
OFF : Power turns OFF. (Power indicator: unlit)
2. Press the INPUT SELECT button to choose input.
Selects video/audio signals input to terminals on the rear
panel.
3. Press the VOLUME/SELECT button to adjust the
speaker volume.
Press this button to display the speaker volume level on the
screen.
+ : The Built-in speaker volume is increased. (00 = 50)
– : The Built-in speaker volume is decreased. (50 = 00)
* Screen indication will disappear about 10 seconds after
operating.
1. Press select button corresponding to the item you
want to adjust.
The item you select is displayed on the screen.
1 PHASE ( ) : Phase control
2 CHROMA ( ) : Chroma control
3 BRIGHT ( ) : Brightness control
4 CONTRAST ( ) : Contrast control
* Screen indication will disappear about 10 seconds
after operating.
With regard to Color system indication
With the COLOR SYSTEM setting set
to AUTO mode, when you turn on the
power or select inputs, the color
system indication appears for about 3
seconds on the screen while PAL or
NTSC signals are being detected.
It does not appear when receiving B/
W signal or when no signal is input.
See page 7 for COLOR SYSTEM
setting.
Notes:
Phase control is effective only in the
NTSC color system mode.
Chroma control is not effective when
receiving B/W or when no signal is
input.
When the Chroma control is set to
level " –20", the picture turns
monochrome.
" NO EFFECT" is displayed (For
about 3 seconds) when your selected
function has no effect.
2. Adjust with the VOLUME/SELECT button.
+
POWER
ON
OFF