Filter
Top Products
46
6
q
Insert editing replaces part of the recorded scene with new
material. Both the picture and Hi-Fi audio soundtrack are
replaced with new ones, while the normal audio soundtrack
remains unchanged. If you wish to change the normal audio
track as well, use the audio dubbing function simultaneously.
Use your VCR as the recorder.
Insert Editing
EDITING (cont.)
Audio signal
Video signal
Recorder
12
45
3
6
8
0
7
9
NUMBER "0"
C.RESET
Another VCR
Player
SHUTTLE
JOG
Your VCR
Before insert editing
After insert editing
Source tape
Recorded tape
MAKE CONNECTIONS
1
Connect the player's VIDEO OUT and AUDIO OUT
connectors to your VCR's VIDEO IN and AUDIO IN on
the front panel.
SET INPUT MODE
2
Press NUMBER key "0". "AU" appears in place of a
channel number.
● Be sure to select "FRONT" at the Aux Input screen.
(To select the correct AUX input connector, follow
steps 4, 5, 9 – 11 from the "Edit From A Camcorder"
section ੬ pg. 42).
LOCATE END POINT
3
Load the recording cassette into your VCR, and play it
back to determine the edit-out point (the end of the
segment to be replaced) using the JOG/SHUTTLE
controls.
● Releasing the JOG/SHUTTLE controls engages the
Still mode .
RESET THE COUNTER
4
Press C.RESET to change the counter display to
"0H00M00S".
LOCATE START POINT
5
Determine the edit-in point (the beginning of the segment
to be replaced) using the JOG/SHUTTLE controls.