Filter
Top Products
EN 23
12 3
4
0
6
78
5
9
4
3
2
You can use a camcorder or another video recorder as the
source player and your video recorder as the recording deck.
Edit From A
Camcorder Or
Another Video
Recorder
MAKE CONNECTIONS
1
Connect the AUDIO/VIDEO OUT connectors on the
camcorder or another video recorder to the front panel
AUDIO/VIDEO input connectors on the recording deck.
● When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder’s instruction manual
for operating procedure.
SET RECORDER’S INPUT
MODE
2
Press NUMBER key "0" so that "F-1" appears on the
display panel.
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
Recording deck Your recorder
IMPORTANT
● To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
● PAL, SECAM and NTSC camcorders can be used as a
player for editing.
● For more information on multi-system compatibility,
੬ pg. 24.
To the remote PAUSE
connector
Editing Cable
(not provided)
AV Cable (not provided)
VIDEO OUT
AUDIO OUT
EDIT
Camcorder
Source player
VIDEO IN AUDIO IN
or
Another video recorder
Source player
NUMBER "0"