JVC HR-J655EA VCR User Manual


 
22 EN
G-CODE
12345678
[0 – 9] =
[
CANCEL
] : DELETE
[PROG] : EXIT
ACCESS G-CODE SCREEN
1
Press PROG..
ENTER G-CODE NUMBER
2
Press the NUMBER keys to
enter the G-CODE number
of a programme you wish
to record.
If you make a mistake,
press CANCEL and input
the correct number.
ACCESS G-CODE
PROGRAM SCREEN
3
Press OK, and the G-CODE
Program screen appears (if
you’re just starting out,
“P1” appears).
IMPORTANT
Make sure the channel position number you wish
to record is displayed; if not, see "G-CODE Setup" on
page 20 and set the Guide Program number for that
G-CODE number correctly.
If the number you entered is invalid, "ERROR" appears
on the screen. Press CANCEL and input a valid G-CODE
number.
If the "G-CODE SET-UP" screen appears, see
"ATTENTION – Regarding Guide Program Number
Set" on page 23.
SET TAPE SPEED
4
Press SP/LP/EP ( ) to set the tape speed.
– P1 –
G-CODE 123456789
START STOP
21:00 = 22:00
SP
DATE TV PROG
25.12 1
: OK
G-CODE Timer
Programming
Before performing G-CODE Timer Programming:
Be sure to read "G-CODE Setup" ( pg. 20).
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the VIDEO channel (or AV
mode).
Select the appropriate colour system by pressing the
COLOUR SYSTEM button. ( pg. 30)
With G-CODE, timer programming is greatly simplified because
each TV programme has a corresponding code number which
your recorder is able to recognise.
TIMER RECORDING (cont.)
G-CODE
[0 – 9] =
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
123
456
7
89
0
2
4
1
3
OK
NUMBER
CANCEL
PROG.
PROG. CHECK
SP/LP/EP