Filter
Top Products
Initial settings
When the TV is first turned on, it enters the initial setting
mode. Follow the
instructions on the on-screen display to
make the initial
settings.
1 Make sure to set the VCR/TV/DVD switch to the
TV position.
• You cannot turn the TV on when the VCR/TV/DVD
switch is set to the VCR or DVD position.
2 Press the button on the remote control
After a short interval the power lamp changes from red
• Check that the AC plug on the power cord from the
TV is connected to AC outlet.
4
he buttons to choose the
LANGUAGE.
The on-screen display will then be in English.
AUTO PROGRAM.
3 AUTO PROGRAM menu appears.
The AUTO PROGRAM menu appears and received TV
channels are automatically stored in the programme
numbers.
• To cancel the AUTO PROGRAM function:
Press the MENU button.
After the TV channels have been registered in
the programme numbers, the PR LIST
menu appears
• If you want, you can now edit the programme
numbers using the AUTO PROGRAM function.
For details, see “To edit the PR LIST menu” on
page 22.
VCR/TV/DVD
Switch
Yellow button
Blue but
OK
ton
Power lamp
Remote control
ress
t
P
sensor
5
he buttons to choose the ENGLISH.
ress
t
P
6
he buttons to choose the
ress
t
P
7
he buttons to enter the
ress
t
P
AUTO PROGRAM.
AUTO PROGRAM
NOW PROGRAMMING CH-01
MENU : EXIT
PC
___ ___
BACK
to green.
/
Remote control
sensor
INSTALL
LANGUAGE ENGLISH
AUTO PROGRAM
:
SELECT
:MOVE
8
Press the OK button to start AUTO PROGRAM.
OK : START
AUTO PROGRAM
START
7
PR LIST
N
I
A
N
ME DELETE
SE
01 -----
02 -----
03 -----
04 -----
05 -----
06 -----
07 -----
08 -----
09 -----
10 -----
11 -----
12 -----
13 -----
14 -----
15 -----
16 -----
17 -----
18 -----
19 -----
20 -----
R
21 -----
22 -----
23 -----
24 -----
25 -----
26 -----
27 -----
28 -----
29 -----
30 -----
T