Filter
Top Products
24
English
RX-ES1SL
Tuner operations
The buttons on the remote control are mainly used for tuner
operations. To use buttons on the remote control, press
FM/AM before operation.
When operating this receiver using the remote control,
always set the mode selector to AUDIO/TV/VCR/DBS.
Tuning in to stations manually
From the remote control ONLY:
1
Press FM/AM to select the band.
The last received station of the selected band is tuned in.
• Each time you press the button, the band alternates between
FM and AM.
You can also select “FM” or “AM” by turning SOURCE SELECTOR
on the front panel.
2
Press repeatedly or hold TUNING 9 or
TUNING ( until you find the frequency you
want.
If you select “FM” or “AM” using SOURCE SELECTOR on the
front panel, press FM/AM on the remote control before this
operation.
• Pressing (or holding) TUNING 9 increases the frequency.
• Pressing (or holding) TUNING ( decreases the frequency.
NOTES
• When you hold and release TUNING 9 or TUNING (, the
frequency keeps changing until a station is tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the ST (Stereo) indicator
also lights up.
Using preset tuning
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
2
again.
From the remote control ONLY:
1
Tune in to the station you want to preset (see
“Tuning in to stations manually” above).
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See “Selecting the FM
reception mode” on page 25.
2
Press MEMORY.
The channel number position starts flashing on the display for
about 5 seconds.
ANALOG
SUBWFR
STTUNED
AUTO MUTING
MH
Z
VOL
LR
ANALOG
SUBWFR
STTUNED
AUTO MUTING
MH
Z
VOL
LR
ANALOG
SUBWFR
STTUNED
AUTO MUTING
MH
Z
VOL
LR
OPEN/CLOSE
DVD VCR DBS TV
DVD VCR DBS TV
DVD MULTI
TV VOL CHANNEL
TUNING TUNINGFM MODE
MEMORY
TOP MENU
CHOICE
AUDIO
ZOOM
ANGLE
REPEAT
DIMMER SLEEP CANCEL
ANALOG/DIGITAL
TV RETURN 100
+
BASS TREBLE
ECHO
SUBTITLE
RETURN
RESERVE
TITLE/GROUP
ON
SCREEN
MENU
VOLUME
FM/AM TV/VIDEO MUTING
AUDIO
HOME CINEMA CONTROL CENTER
BASS TREBLE
PROGRESSIVE
AUDIO/TV
/VCR/DBS
KARAOKE
DVD
KARAOKE SOUND
KARAOKE
VOCAL
EFFECT
KEY
KEY
123
4
VFP
INPUT
56
789
10
3D
0 +10
ENTER
Setting the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other countries
use 10 kHz spacing. 9 kHz interval spacing is the initial setting.
• Be sure the receiver is turned off, but is plugged into an AC outlet
when setting the AM tuner interval.
On the front panel ONLY:
To select the 10 kHz interval:
Hold down ADJUST and press STANDBY/ON .
To change back to the 9 kHz interval:
Hold down SETTING and press STANDBY/ON .
STANDBY / ON STANDBY
DIMMER SETTING ADJUST SURROUND
DVD MULTI DVD DBS VCR TV FM / AM
SET / TUNER PRESET
SOURCE SELECTOR MASTER VOLUME
PHONES
/ MULTI JOG
EN24-25RX-ES1&XV-NK58[UGUX]f 03.5.16, 16:1624