Filter
Top Products
10
NOTES
• When shipped from the factory, the DIGITAL IN terminals have
been set for use with the following components:
– DIGITAL 1 (coaxial): For DVD player
– DIGITAL 2 (optical): For DBS tuner
– DIGITAL 3 (optical): For TV tuner
If you connect other components, change the digital input
(DIGITAL IN) terminal setting correctly. See “Setting the digital input
(DIGITAL IN) terminals—DIGITAL IN” on page 19.
• Select the correct digital input mode. See “Selecting the analog or
digital input mode” on page 11.
Digital optical cord (not supplied)
Digital coaxial cord
(supplied: 1 cable)
VIDEO
COMPONENT VIDEO
SUBWOOFER
OUT
DIGITAL IN
DIGITAL 3
(TV)
DIGITAL 2 (DBS)
DIGITAL 1
(DVD)
DVD
IN
DVD IN
FRONT
SURR (REAR)
HT LEFT
CENTER
L
DBS IN MONITOR
OUT
DBS
IN
VCR
MONITOR OUT
VIDEO
OUT
(REC)
IN
(PLAY)
CENTER
SPEAKER
SURROUND
SPEAKERS
RIGHT LEFT RIGHT LEFT
FRONT
SPEAKERS
CAUTION:
SPEAKER
IMPEDANCE
8
~
16
Y
P
B
P
R
S-VIDEO
OPTICAL
DIGITAL OUT
COAXIAL
DIGITAL OUT
DBS tuner
TV
DIGITAL IN
DIGITAL 3
(TV)
DIGITAL 2 (DBS)
DIGITAL 1
(DVD)
DVD Player
Before connecting
a digital optical
cord, unplug the
protective plug.
Connecting the power cord
Before plugging the power cord into an AC outlet, make sure that all connections have been made.
Plug the power cord into an AC outlet.
Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.
We recommend that you use a coaxial cable to connect the antenna, since it is well-shielded against interference.
NOTE
The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:
– When you unplug the power cord.
– When a power failure occurs.
CAUTIONS:
• Do not touch the power cord with wet hands.
• Do not alter, twist or pull the power cord when disconnecting it, or put anything heavy on it, which may cause fire, electric shock, or other
accidents.
• Do not plug in before setting the voltage selector switch on the rear of the receiver and all connection procedures are completed.
Getting started
Digital connection
01-10RX-ES1SL[UJ]f 03.5.19, 20:1110