Filter
Top Products
16
Getting started
Getting started
Connections
*In the following description, “TV” may be substituted with “monitor” or “projector.”
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
• Do not connect the AC power cord until all other connections have been made.
• Since different components have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs
to your separate audio equipment. (See the following pages.)
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable
(optional) in addition to the (standard) video connection to get better picture quality.
Enabling the S-VIDEO output or the VIDEO output
For your TV connection, you can use either the S-video output or the component video output at a time.
When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the
rear panel to “S-VIDEO AND VIDEO”. ( For XV-S400BK, the VIDEO jack is enabled regardless of this switch position.)
Then, “S-VIDEO” appears on the display window for a few seconds.
Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed
setting is not effective.
Before making any connections
To connect to a TV
NOTES
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
• Connect the unit to an NTSC television. Do not connect the unit to a PAL television.
PCM / STREAM
COAXIAL
COMPONENT
S-VIDEO VIDEO
RIGHT LEFT
YP
B PR
OPTICAL
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
Yellow
Audio/Video cable
(supplied)
White
Red
S-video cable
(not supplied)
The unit
Yellow
White
Red
DIGITAL OUT VIDEO OUT
AUDIO OUT
AV COMPU LINK
S-VIDEO
AND
VIDEO
COMPONENT
AND
VIDEO
VIDEO OUT SELECT
For XV-S400BK
If the TV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function.
See “AV COMPU LINK remote control
system” on page 52 for details.
TV
: For XV-S400BK
VCDVD
TITLE TRACK CHAP
A
-
B1
PROGRAM
RANDOM
GROUP
(Display Window)
;96%.&B(QJERRN3DJH7KXUVGD\'HFHPEHU30