Filter
Top Products
Selecting different measuring methods
The meter is able to measure the RF signal level (analogue and digital channels),
“BER” (Bit Error Rate) as a bar indicator for “Pre BER” and as a numeric value for “Post
VITERBI BER”. The “BER” can only be measured on digital channels.
Press the “ON” button to toggle between “RF” and “BER” mode.
Getting started
To find the regions you want, scroll through the stored list. To switch regions, press and
hold down the right or left arrow button for about 5 seconds.
The meter is factory pre-programmed with the following German regions:
Berlin VHF
Berlin UHF
Bremen/Unterweser
Düsseldorf
Frankfurt VHF
Frankfurt UHF
Hamburg/Lübeck VHF
Hamburg/Lübeck UHF
Hanover/Braunschweig VHF
Hanover/Braunschweig UHF
Kiel VHF
Kiel UHF
Cologne/Bonn
Munich VHF
Munich UHF
Nuremberg VHF
Nuremberg UHF
All VHF channels 5-12
All UHF channels 21-69
Additional region lists can be obtained as required from the Kathrein website
“www.kathrein.de”.
Selecting the individual channels
Press and hold down the right or left arrow button for less than 5 seconds to select the
various channels.
10