Filter
Top Products
Getting started
Connect the MFK 16 input on the front of the unit by a BNC cable to the antenna.
Alternatively, you can use the BNC/IEC, the BNC/F adapter and the standard antenna
cable (IEC).
Switching on the meter
Press and
hold for 5
seconds
The display first shows the version number and the battery state of charge. The meter
automatically switches to the next display readout.
Region Channel no.
Signal level (RF level) as bar indicator in range 25 to 75 dBμV with over/under range
indicator.
Battery charge
The second display readout indicates:
- the last region selected,
- the channel number,
- the received HF level in dBμV as a bar indicator,
- the battery state of charge.
9
Selecting a region
The factory pre-programmed regions enable users to scroll through the channels
in their respective region. This means both analogue (in RF level mode) and digital
transmissions (in BER mode) can be detected. Each region has more than one
transmission channel. Each channel is designated as a MUX (multiplexer). Each MUX
transmits multiple stations.