Filter
Top Products
54
SEARCH CHANNELS (CHANNEL SEARCH)
Press the
button You will be asked whether you wish to save the changes or not. Use the
buttons
to make the selection and confi rm the selection with the
button. If you select “Yes, save changes”, the
newly found channels will be added to the end of the channel list. Then press the
button to exit the menu.
The channel list is opened on to the TV screen by pressing the
button (see also section “On-screen
displays” “Channel list TV/Radio”).
After completion of the search, you will
see the following message (example):
Make sure your reception system is aligned to the selected satellite.
Press the
button to move to the next selection item.
Transponder frequency
Use the
buttons or the keypad to select the transponder frequency on which the channel being
sought is transmitted. At the bottom right of the screen display, the receiver shows the current signal strength
and signal quality of the selected transponder.
Press the
button to move to the next selection item.
Service ID
Using the
buttons or the keypad, enter here the service ID of the channel being sought.
When you have made your settings, use the
buttons to select “Start Search” and press the
button to start scanning. You can cancel the scan at any time by pressing the
button.
During the search you will see a display that shows you the progress of the search.