Filter
Top Products
25
Selection “UAS 481” or “EXR 551”
Transmission channel
Use the
buttons to select a free available transmission channel. A maximum of four transmission
channels are available (1400, 1516, 1632 and 1748 MHz).
Test connection
When you have set a free transmission channel, press the
buttons to switch to the “Test connection”
selection fi eld and press the
button. The receiver now tests whether a connection to the single-cable
system can be established or not. As soon as the receiver has established a connection to the single-cable
system, you will see the following display:
FIRST INSTALLATION: Single-cable system (Manual)
When the “UAS 481” single-cable
feed system is being used, it is
essential that the LNB is set to
“Wideband”!
When the “EXR 551” single-cable
switching matrix is being used, it
is essential that the LNB is set to
“Universal”!
If no connection to the single-cable system could be established, the following display appears:
Check your settings and if necessary call for expert help.
Press the
button to acknowledge this display.
Then press the
button. You will be asked whether
you wish to save the changes. Use the
buttons
to select “Yes, save changes” and confi rm by pressing
the
button. Now press the
!
(green) button.
The receiver will automatically display the selection menu for the channel search. Continue by selecting
the item (Execute Channel search).