Filter
Top Products
36
Press the
"
(yellow) button once (twice for portal
channels) to view further soundtrack selection options,
if these are transmitted by the channel provider. Use
the
buttons to scroll through the available
selection options. Pressing the
"
(yellow) button
again, or pressing the
button exits this display
again.
OPTION SELECTION
Calling this up displays the channel selection/sorting list from which you selected the last channel.
At the top right you will see the selected channel list (TV or radio channels) displayed.
Press the
#
(blue) button to switch between the TV and radio channel lists.
“No or bad signal” indicates that an error has occurred in the reception system or in the receiver settings,
or that the transponder is not transmitting.
Check the Sat IF connection and the LNB confi guration. If you have changed settings, compare them
against the basic settings (provided you had made a note of them as suggested).
ERROR SIGNALLING
CHANNEL LIST – TV/RADIO
ON-SCREEN DISPLAYS (OSD)
Also pay attention to the
bars at the bottom of the on-
screen display! These provide
information on what to do next.
Press the
button to access the
channel list.
the channels using the
and
buttons. You can also however select the sub-channels of a portal
channel directly using the
buttons, without having previously pressed the
"
(yellow) button.