Filter
Top Products
15
FIRST INSTALLATION: General
Picture format
Here you select the type of screen display, depending on the setting of your TV format:
- TV format “4:3”: Pan & Scan or Letterbox
- TV format “16:9”: Always 16:9 or automatic
TV-SCART-Output
Select the type of video signal at the TV Scart socket here. Select the signal that your TV set can process.
- CVBS – Colour Video Baseband Signal
- RGB – Red/Green/Blue signal or
- Y/C – S-Video signal (luminance/chrominance)
Press the
!
(green) button to move to the next menu.
The following display appears:
System
Select the setting here to match your reception system using the
buttons. You have the following
options:
- DiSEqC™1.0
- One Cable
- Simple LNB
If your reception system is DiSEqC™-capable, at “System” select “DiSEqC™1.0” (allows switch-over
from receiving one satellite to receiving another one). If your reception system is not DiSEqC™-capable,
select the setting “Simple LNB”. If your receiver is connected to a single-cable system, select “One Cable”.
Press the
button to move to the next menu item.
Continue with the relevant section of First Installation