Filter
Top Products
40
PREVIEW VIEW (PROGRAMME LISTINGS)
The Preview view (TV Program Guide) can be called up at any time in EPG by pressing the
"
(yellow)
EPG - ELECTRONIC PROGRAMME GUIDE
button.
In the “Preview” view you will see all the programmes that will be shown in the previous “Current” list of
selected channels. Provided that EPG data has been supplied by the channel provider, the receiver shows
the programmes that will be shown on the selected channel for several days in advance.
You can use the cursor buttons (
) to select the desired programme and if available you can
use the
button to call up further information on the desired programme.
You can use the
buttons to scroll through the channels in the order of the overall channel list
(the channels can also be selected by inputting digits with the keypad); you remain however in “Preview”.
The
&
button allows you to scroll backwards and forwards a day at a time.
Using the
(red dot) button you can load the selected programme into the recording settings (see item
“Recording”).
Also pay attention to the
bars at the bottom of the on-
screen display! These provide
information on what to do next.
available you can use the
button to call up further information on the desired programme. The
button
allows you to look ahead in 15-minute steps to future programmes for the channels (press the
button
to return to the current time).
If you wish to view the programme currently being shown on a channel, you need not exit the EPG,
just select the desired channel and press the
button. At the top right of the screen you will see the
current TV picture for the selected channel. The picture however only appears once the
button
has been pressed. Previously what you saw was the picture of the old channel that had previously
been selected, even though the EPG was no longer set to that channel.