Filter
Top Products
15
Satellite and position
Use the
buttons to select the desired
satellite whose signal is to be received by the tuner.
When you have selected your desired satellite, use
the
buttons to switch to the selection of the
“LNB type”.
DiSEqC™ Switch
Select the setting here to match your reception system using the
buttons. If your reception
system is DiSEqC™-capable, select “ON” at the “DiSEqC™ switch” selection (allows switch-over from
receiving one satellite to receiving another one). If your reception system is DiSEqC™-capable, allow the
default setting “OFF” to remain. Press the
button to move to the next menu item.
For ease of understanding, the further explanations of the fi rst installation are split into two columns.
The description on the left refers to installation of a non-DiSEqC™-capable system and on the
right to installation of a DiSEqC™-capable system.
FIRST INSTALLATION
Number of satellites
Press the
button to select the satellite to be
received.
The following display appears:
When selecting the satellite(s),
make sure that your reception
position is aligned to the desired
satellite(s)!