Filter
Top Products
Installation clearances
• The location must be large enough to allow the washer door
to be fully opened.
Washer Dimensions
Additional spacing should be considered for ease of
installation and servicing.
Additional clearances might be required for wall, door, and
floor moldings.
Additional spacing of 1 in. (2.5 cm) on all sides of the washer
is recommended to reduce noise transfer.
Companion appliance spacing should also be considered.
Y
(965 cm}
Recommended installation spacing for custom
undercounter installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
(
39" rain
(99 0 cm)
Recommended installation spacing for recessed or
closet installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
- y
34"
(864cm)
24 in _ *
(155 cm 2)
I1"I'_" sW/ _'l 4"I'_-
(25 era) (80cm) (102 era)
2
(76cm/
(76 on/)
T
1. Side view - closet or confined area
2. Closet door with vents
/25 cm) /686 cm) /25 cm)
1
1.Recessed area
Recessed or closet installation - Washer on pedestal
-- ,4
I1"I'_ sly' _,q4"
(25¢m) (80cm) /102 era)
2
2. Side view - closet or confined area
Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
48 in? "
(s_ 2)
4,
0
I'
24 in,2 *
(155 cm 2 )
3" (7,6 crn)
Y
£
3" (7,6 crn)
5½ ''_*
(14 cm)
76"
(193 cm)
1" (2,5 cm)
_-27"-_ _ _ 1.....
68,6 cm 2,5 cm
*Min. top and bottom air openings for closet door:
**External exhaust elbow requires additional space.
***Wall, door and floor molding may require
additional spacing.