Filter
Top Products
7. If there is no suitable cable channel, the cable may be routed directly from the
window molding to the right or left corner of the trunk.
Figure 15: Cable routing along the trunk rubber molding
It may be necessary to remove the plastic housings from the antenna connectors in
order to feed the cables through narrow openings. Note: Remember to reconnect
the correct housing to its corresponding cable.
Figure 16 Removing connector housings
Most Sirius receivers (including the Kenwood KTC-SR901) have two antenna inputs
with the same color-coding as the antenna cable - white = terrestrial; blue = satel-
lite. Simply plug the cable with the blue connector into the blue input and the cable
with the white connector into the white input.
Figure 17: Connecting the Sirius receiver
However, some receivers use only one SMB connector, in which case the plastic
housing must be permanently removed and the connector inserted directly into the
receiver.
9