Kenwood DVR-505 DVD Player User Manual


 
34
DVR-505/DVR-7000 (EN)
Operations
DVD
CD
VCD
Program play
Program Edit
1 During stop mode, press the P.MODE
key on the remote.
2 Select specific title/chapter or
track by Press Cursor up/down
(5/) keys or numeric keys (0-9).
3 Press the ENTER key.
Program edit display appears.
(An example of DVD program edit menu)
4 Select Add icon on the screen to
register selected value onto
Playlist, then press the ENTER key.
You can listen to the desired tracks or chapters of the current disc in any desired order.
5 You can select maximum 32 val-
ues by repeating step 2
-
4.
6 Press the PLAY key to start play-
back.
2
: Selected icon
: An icon which can be selected
: An icon which presently can not be selected
÷ When you dont add values onto Playlist and
return to play mode, select Done icon and press
ENTER key on the remote.
÷ While a disc is playing, press P.MODE key on the
remote to start Program play
÷ To return to standard play, press the P.MODE key
again.
÷ MP3 discs can not be programmed with this pro-
gram mode. (MP3 program play q)
Add icon --- Add value onto Playlist
Delete icon --- Delete value from Playlist
Insert icon --- Insert value in Playlist
Play icon --- Play program play
Done icon --- Return to stop or resume mode
Registering and playing the program
Insert the disc to be used in programming in the tray, close it and press the PLAY key so that the player reads the
disc information by playing disc until display READING disappears. (If the tray is opened after this, the above
procedure should be repeated so that the player reads disc information again.)
PROGRAM EDIT
2
All
Add
Delete
CT
Play
Done
Title
(12) (2)
Chapter
Playlist
PROGRAM EDIT
2
All
Add
Delete
CT
Play
Done
Title
(12) (2)
Chapter
Playlist
2 All
Note
Note
P.MODE
+100
ENTER
ENTER
ENTER
ENTER