Filter
Top Products
DVF-3080/DVF-8100 (EN/K,P,E,X,Y)
Set Up functions
15
Preparations
LOCK (Parental Control)
Rating
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain paren-
tal control information that applies to the complete disc
or to certain scenes on the disc. Movies and scenes are
rated from 1 to 8, depending on the country. Some discs
offer more suitable scenes as an alternative.
The parental control feature allows you to block access
to scenes below the rating you input, thereby prevent-
ing your children from being able to view material you
believe is unsuitable.
1 Select "Rating" on the LOCK menu then press
the Cursor right (3 ) key.
2 To access the Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a secu-
rity code you are prompted to do so.
Input a digit code and press ENTER key. Enter
it again and press ENTER key to verify. If you
make a mistake before pressing ENTER key,
press CLEAR key.
3 Select a rating from 1 to 8 using the Cursor up/
down (5/∞) keys.
Rating 1-8: Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
Unlock
If you select unlock, parental control is not active and the
disc plays in full.
If you set a rating for the player, all disc scenes with the
same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is avail-
able on the disc. The alternative must have the same rat-
ing or a lower one. If no suitable alternative is found, play-
back stops. You must enter the 4-digit password or
change the rating level in order to play the disc.
4 Press ENTER key to confirm your rating selec-
tion, then press SETUP key to exit the menu.
Note
Note
Password (Security Code)
You can enter or change password.
1 Select Password on the LOCK menu then press
the Cursor right (3) key.
2 Follow step 2 as shown left column (Rating).
"Change" or "New" is highlighted.
3 Enter the new 4-digit code, then press ENTER
key. Input it again to verify.
4 Press SETUP key to exit the menu.
If you forget Security Code
If you forget your security code you can clear using the
following steps:
1 Press SETUP key to display the Setup menu.
2 Input the 6-digit number "210499" and the se-
curity code is cleared.
3 Enter a new code as described above.
Country Code
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the list
in the reference chapter.
Ratings are country-dependent.
1 Select "Country Code" on the LOCK menu,
then press the Cursor right (3).
2 Follow step 2 as shown left column (Rating).
3 Select the first character using the Cursor up/
down (5/∞) keys.
4 Shift the cursor using the Cursor right (3) key.
and select the second character using the Cur-
sor up/down (5/∞) keys.
5 Press ENTER to confirm your country code se-
lection.