Kenwood DVF-S500 DVD Player User Manual


 
10
Preparations
DVF-S500 (Y)
COMPONENT VIDEO
OUT
OUT
VIDEO OPTICAL
AUDIO
DIGITAL OUTPUT
(PCM/BIT STREAM)
1
2
OUT
Y
R
C
B
C
System Connections
Caution:
Do not plug in the power lead until all connections are com-
pleted.
Make connections as shown below.
When connecting the related system components, re-
fer also to the instruction manuals of the related com-
ponents.
Malfunction of microcomputer
If operation is not possible or erroneous display appears even though
all connections have been made properly, reset the microcomputer
referring to "In case of difficulty".
°
Connecting to a TV with video (composite) input terminal
Audio cord
TV
DTS disclaimer clause
When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is
connected to an amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to
the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.
Connection with TV
Connect to video input terminal of TV directly. If you connect to TV through VIDEO (VCR) as well as connect to video input terminal
of TV with VIDEO (VCR), picture will be distorted when playback. It is because of copy-protect function.
Video cord
Select "ANALOG" for "AUDIO OUT"
from the SETUP menu. %(
COMPONENT VIDEO
OUT
OUT
VIDEO OPTICAL
AUDIO
DIGITAL OUTPUT
(PCM/BIT STREAM)
1
2
OUT
Y
R
C
B
C
Connecting to a TV with Component video input terminals
TV
Audio cord
Component video cords
Video cord
Select "ANALOG" for "AUDIO OUT"
from the SETUP menu. %(
03.8.24, 11:10 PM10