Kenwood KDV-3241Y DVD Player User Manual


 
26
|
KDV-3241Y
Photo Operation
JPEG/TIFF disc compatibility
with this player is limited as
follows:
Depending upon the size and the number of JPEG/
TIFF files, it could take a long time for this unit to
read the disc’s contents. If you do not see an on-
screen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG/TIFF files to less than 2M pixels as 2760 ×
2 048 pixels and burn another disc.
The total number of files on the disc should be less
than 3 000.
Some discs may be incompatible due to a different
recording format or the condition of disc.
Ensure that all the selected files have the .jpg or .tiff
extensions when copying into the disc.
If the files have .jpe or .jpeg extensions, please
rename them as .jpg file.
File names without .jpg or .tiff extension will not
be able to be read by this unit. Even though the
files are shown as JPEG or TIFF image files on the
computer.
Some JPEG/TIFF files may not operate due to a
different encoding format or the condition of disc.
Viewing slide shows
This unit can play discs with JPEG or TIFF files.
1 Insert a disc in the unit.
For a disc that includes only photo files, “READING”
appears on the display, and slide show starts
automatically.
2 Press [DISPLAY] to show or hide the help bar
while viewing the slide show.
3 Press [DISC MENU] ([DISC MENU/SETUP] or
STOP [7] on the remote control) to return to
the menu screen.
2
5
1
3
4
7
8
9
6
1. Current file number/Total file number
2. Previous file name
3. Slide show interval time (SLOW, NORMAL, FAST,
OFF)
4. Repeat mode
5. Current folder name
6. Thumbnail image
7. Current file name
8. Resolution
9. Next file name
• For a disc that includes audio and movie files, the media
type indicator tabs, MUSIC and MOVIE will be displayed
along with PHOTO. To play the photo file, select PHOTO
and then press [ENTER]/[3/8](PLAY [3]on the remote
control). About the the media type indicator tab, refer to
Selecting a media type on page 10.