Filter
Top Products
52
5.1 Channels Surround Processor Control Function
A
Recalling the Kenwood Preset Sound
Each time you touch [ 2 ] or [ 3 ] , the preset
sound setting switches between the “FLAT“,
“POPS“(TOP40), “ROCK“, “DANCE“, “VOCAL“
and “CLASSIC“.
Storing Your Sound Settings
Touch a [ 1 ] - [ 3 ] that you want to use for the
equalizer curve for at least two seconds.
Recalling Your Sound Settings
Touch a [ 1 ] - [ 3 ] for the desired equalizer curve.
Returning to the Sound Effect Menu
Screen
Touch [ RTN ] to return to the sound effect menu
screen.
Selecting the Adjust Band
Touch the each box to select the band.
Adjusting the Center Frequency
• Each time you touch [ ], the frequency is
increased.
• Each time you touch [ ] , the frequency is
decreased.
A1: 60Hz/ 80Hz/ 100Hz/ 120Hz/ 160Hz/ 200Hz/
250Hz
A2
: 315Hz/ 400Hz/ 500Hz/ 630Hz/ 800Hz/ 1kHz
A
3
: 1.25kHz/ 1.6kHz/ 2kHz/ 2.5kHz/ 3.15kHz/
4kHz
A
4: 5kHz/ 6.3kHz/ 8kHz/ 10kHz/ 12.5kHz/ 16kHz
Adjusting the Quality Factor
Each time you touch [ ] or [ ] to switch the
Bass quality factor as follows:
1(0.25) / 2(0.5)/ 3(1.0) /4(2.0)
Adjusting the Gain
• Each time you touch [ ], the gain is increased.
• Each time you touch [ ], the gain is
decreased.
Setting the Speaker Type
Using this function to set the diameter of the
speaker optimizes the sound quality to the
speaker diameter.
Each time you touch [ 2 ] or [ 3 ] to switch the
speaker type as follows:
" STANDARD "
Speaker with a general diameter
" NARROW "
Speaker with small diameter
" WIDE "
Woofer with a large diameter
" MIDDLE "
Woofer with a small diameter
F
C
D
B
G
E
H
A1
B
C
D
A2
A3
A4
H
E
F
G
Parametric Equalizer Screen
KVT_911DVD_Eng_01 02.1.25 2:25 PM Page 52