Filter
Top Products
22
Audio connection to a receiver using the coaxial digital audio output
At the back of the DVD player, there is a digital audio output socket “COAXI-
AL” for a coaxial cable.
This can be used to connect the following:
• an A/V receiver or an A/V amplifier with a digital multi-channel sound
decoder (MPEG-2, Dolby Digital)
• a receiver with two channel digital stereo (PCM)
Have the following cable ready:
1. Coaxial cable (not supplied)
Connect the coaxial digital output with the corresponding input on the AV
receiver by means of a coaxial cable (not included in your accessory). The
coaxial digital audio output sends an encoded “RAW” digital audio signal to your
receiver for decoding. Please note that this connection is only possible if your
digital receiver is compatible to Dolby Digital, MPEG and/or PCM.
AUDIO AND VIDEO CONNECTIONS
1
What is digital multi-channel sound?
Digital multi-channel sound offers you a maximum of sound quality. You need a
multi-channel A/V receiver or amplifier that supports at least one of the audio
formats of the DVD player (MPEG-2, Dolby Digital). For the formats that your
receiver supports, refer to the manual of the receiver.
A loud distorted noise comes from your loudspeakers:
In this case the receiver is not suitable for the digital audio format of the DVD
player. Playback with 6 channel digital surround sound is only possible, if the
receiver has a digital multi-channel sound decoder.
RECEIVER
COAXIAL DIGITAL INPUT
ᕢ
*Picture of model DVD 4620